HRC is imported as raw material for conversion into the final product, CRC. Before processing into cold rolled steel, it is necessary to pickle the steel to eliminate the black oxide scale on the surface, subsequent to which, the Hot Rolled flat steel is cold rolled to the required final thickness at room temperature. In cold rolling, the hot rolled coil is rolled into thinner gauges of the required size through further passage in rolling stands.
Cold rolled steel possesses a better surface, enhanced strength, and better dimensional characteristics than hot rolled steel.
The product passes through an electrolytic cleaning line for removal of oil, iron powder and other foreign materials. The steel is then annealed, which involves slow heating and cooling to improve work ability.
Skin Passing is done to improve and normalize the mechanical properties and to get the specified surface finish, hardness and flatness; after which the finished product is passed through a recoiling line to adjust the width by edge trimming, coil weight by dividing a large coil into small coils to meet the requirement, inspect dimensions, surface quality, flatness, and remove defective parts and to apply rust-preventive oil.
We are a socially responsible corporate citizen, and actively comply with the applicable laws and regulations, ethical standards, and industrial norms.
We also believe in sustainable growth and returning to the society.
Address: 1/F Arif Habib Center, 23 M.T. Khan Road, Karachi, Pakistan.
Tel: +92 21 32468317
Tel: +92 21 32468319
Tel: +92 21 32468322
Fax: +92 21 3246 8316